Step 2: Download and Install X-CTU Software

For proper RF Modem configuration and operation, X-CTU software (version 5.2.8.5 or later) must be downloaded and installed on each computer used in conjuntion with this guide.

Installing X-CTU Software

1. Download X-CTU at www.digi.com/xctu
2. Browse to the folder where you have saved the above install file
3. Double-click on the installer file and follow the X-CTU Setup Wizard
4. When asked if you would like to check Digi's web site for firmware updates, click Yes
5. After the firmware updates are complete, click Close. Updates may take a few minutes, please be patient.
6. Start X-CTU by double-clicking on the X-CTU icon on your desktop, or by selecting Start > Programs > Digi > X-CTU

The X-CTU software is now ready to be used.

You have just completed Goal #2: Downloading and installing the X-CTU configuration software.

Back to Setup | Move to Create Network